Snorkel MB26J Manual de usuario Pagina 1

November 2012

1. Introduction1 - 3ROTATION GEARThe complete mast, jib and cage assembly can be rotated to provide a maximum outreach of 2.6m in the case of the MB20

2. Operation & Specications2 - 12. Operation & Specications2.1 INTRODUCTIONSPECIAL LIMITATIONSThe purpose of this machine is to provide fast

2. Operation & Specications2 - 22.2 GENERAL DESCRIPTIONThe MB20/26J are self propelled, fast acting aerial work platforms, designed to raise two

2. Operation & Specications2 - 32.3 SAFETY INSPECTIONThis Safety Inspection shall be carried out by the owner immediately prior to transporting t

2. Operation & Specications2 - 4 Figure 4: Lower Control Panel1. Emergency Stop2. KeySwitch - Platform Controls- OFF - Lower Controls3. Analog

2. Operation & Specications2 - 5The function of the mast straps is to ensure that masts descend in the correct order and more importantly, that m

2. Operation & Specications2 - 614. FINAL PREPARATION Congure the masts and jib to the stowed position. Replace all machine covers and secure.

2. Operation & Specications2 - 7UPPER CONTROL PANEL Figure 3: Upper Control Panel!!DO NOT operate the machine from the upper controls until the

2. Operation & Specications2 - 8ITEMS NAMES FUNCTION4 Steering Switch Turns the wheels left or right.5 Selector Switch Pre selects Jib, Mast or M

2. Operation & Specications2 - 9 Figure 4: Lower Control Panel1. Emergency Stop2. KeySwitch - Platform Controls- OFF - Lower Controls3. Analogue

2. Operation & Specications2 - 101. Ensure that the Key Switch on the Lower Control Box is turned to the Platform Controls position and both em

2. Operation & Specications2 - 11EMERGENCY SITUATIONSIn any emergency situation, the immediate action is to push the red “Emergency Stop” button.

2. Operation & Specications2 - 122.5 TRANSPORTATIONMACHINE WEIGHTSBefore transporting or lifting the MB20/26J machine be aware of its weight. It

2. Operation & Specications2 - 131. Never approach the MB20J from the front or rear while fork lifting.2. Use maximum forklift tilt as soon a

2. Operation & Specications2 - 14TRANSPORT BY TRUCKThe MB20/26J can be carried on a suitably rated transportation vehicle or trailer. Because of

2. Operation & Specications2 - 15Proceed as follows:- (Refer to the valve block drawing Figure 6.)1. Fully lower the jib boom and the mast sect

2. Operation & Specications2 - 16LONG-TERM STORAGEPRESERVATION1. Clean and touch up damaged paint surfaces.2. Fill the hydraulic tank to oper

2. Operation & Specications2 - 17DAILY PREVENTATIVE MAINTENANCE CHECKLISTDaily preventative maintenance will prevent abnormal wear and prolong th

2. Operation & Specications2 - 18SPECIFICATIONSMB20JPARAMETER MB20J EU VERSION MB20J US VERSIONDuty Cycle 45%over 8 hour cycle 35%over 8 hour cyc

2. Operation & Specications2 - 19SPECIFICATIONSMB26JPARAMETER MB26J EU VERSION MB26J US VERSIONDuty Cycle 45%over 8 hour cycle 35%over 8 hour cyc

MB 20/26JENGLISHWhen contacting Snorkel for service or parts information, be sure to include the MODEL and SERIAL NUMBERS from the equipment nameplate

2. Operation & Specications2 - 20NOTES:

Local Distributor / Lokaler Vertiebshändler / Distributeur localEl Distribuidor local / ll Distributore localeEUROPE, MIDDLE EASTAFRICA & ASIAPHON

All personnel shall carefully read, understand and follow all safety rules and operating instructions before operating or performing maintenance on an

ContentsCONTENTS PAGE NUMBER1. INTRODUCTION 1 - 1SPECIAL INFORMATION 1 - 1SPECIAL LIMITATIONS 1 - 1MANUAL FORCE 2 - 1PLATFORM CAPACITY 2 -

1. Introduction1 - 1!!Indicates a potentially hazardous situation which, if not avoided, could result in severe injury or death.W A R N I N G1. Introd

1. Introduction1 - 2PLATFORMThe MB20/26J platform is large enough for two operators indoors, one outdoors and has a free-draining perforated oor wit